Latest topics
» Are these Francis Barnett
Today at 8:46 am by kerabo

» Hello - new owner 1958 Crusier 2T, bike registration help, photo added
Today at 7:36 am by FB vincent

» cruiser 45 carburettor
Today at 7:34 am by piston 197

» Buckled flywheel
Yesterday at 7:41 pm by piston 197

» May help someone Handelbars
Yesterday at 7:39 am by kerabo

» CWC rims sizes
Thu Nov 15, 2018 7:36 pm by Mcventures

» 1935 Francis Barnett Cruiser Project
Thu Nov 15, 2018 3:02 pm by FBKev

» Powerbike pinking problem
Wed Nov 14, 2018 8:44 pm by ztis1

» 6e carburettor
Wed Nov 14, 2018 8:06 pm by piston 197


Model 96 fuel tank

Go down

Model 96 fuel tank

Post  dalgrae on Sat Jul 29, 2017 9:54 am

Can someone possibly please advise me regarding the fuel tank on my 1965 model 96 ,the bike has been off the road for many years when I found it ,but is complete and looks very original,during its total refurbishment,I am removing the existing green paint from the tank back to bare metal,the bike came with 2 loose rubber tank knee pad grips,the only colour paint on the tank back to the metal is green,but there are marks in the metal that show the rubber grips have been there for a very long time,all the pictures/photos I can find do not show any tank knee grips but do show them on the James M16 ,.

Any advice most welcome

Regards. Colin

dalgrae

Posts : 56
Join date : 2017-04-08
Age : 68
Location : Bristol

Back to top Go down

Knee pads

Post  piston 197 on Sat Jul 29, 2017 11:22 am

Colin every time I have had an original model 96 they have either had stick on kneepads, or marks where they have been, when I see a restored one ,they are usually omitted
Based on this I would suggest they were original fitment, but were liable to come off ? and not be readily available to replace ?
The knee pads seem to be the same ones fitted to the Fulmar, as the 96 was a bit of a "parts bin" special and it shared parts from earlier models, panel from James L20,seat from sports twin, frame from model 86 etc.
AMC were desperate to produce a "new " model and raided the parts bin for suitable parts to keep costs down, unfortunately it was too late, the 96 was launched in July 1965 and a year later it was all over !
JH
avatar
piston 197
Moderator

Posts : 4106
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

Re: Model 96 fuel tank

Post  dalgrae on Sat Jul 29, 2017 11:45 am

Many thanks John. It was probably what I was expecting in an answer I will give the pads I have another good look ,and if Ok fit them ,any idea what type of glue to use I am mindfull of it reacting wth the paint

Thanks again. Colin

dalgrae

Posts : 56
Join date : 2017-04-08
Age : 68
Location : Bristol

Back to top Go down

Not a clue ?

Post  piston 197 on Sat Jul 29, 2017 12:06 pm

Not my area I am afraid, might be worth talking to anybody who sells/restores 1960's Unit triumphs as these are similarly stuck on ?
JH
avatar
piston 197
Moderator

Posts : 4106
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

Re: Model 96 fuel tank

Post  dalgrae on Sat Jul 29, 2017 2:39 pm

Again John thanks

dalgrae

Posts : 56
Join date : 2017-04-08
Age : 68
Location : Bristol

Back to top Go down

Re: Model 96 fuel tank

Post  paulfb96 on Tue Aug 01, 2017 4:44 pm

I've had my 96 since the early 70s, I was the second owner and it did have the rubber pads on when I got it.
I restored it a while back now but I did find some new tank rubbers at the time, they are an exact match and I don't think they are anything special so you should be able to find new ones.
I can't remember what I used to glue them on with but they haven't moved in all that time. I vaguely remember using evostick or something similar, but can't sure. I know I coated both surfaces and had to make sure they lined up first time.

PS
avatar
paulfb96

Posts : 40
Join date : 2008-10-05
Location : Cranwell, Lincolnshire

Back to top Go down

Re: Model 96 fuel tank

Post  dalgrae on Wed Aug 02, 2017 7:21 am

Hi thanks for this ,I have had a good look in the boxes that came with the bike and there are a pair of good condition pads that match the markings on the tank,and looking at various forums it seems anything from a good double sided tape to Silicon sealant is suitable,so I think I will use some black silicon on mine

Thanks again

Regards. Colin

dalgrae

Posts : 56
Join date : 2017-04-08
Age : 68
Location : Bristol

Back to top Go down

Knee grips

Post  Bigjim on Wed Aug 02, 2017 5:36 pm

Are they the same as the AMC 4 stroke ones used on the 250s?
They look a bit like the things people used to stick on their shoes as the leather wore out.
avatar
Bigjim

Posts : 167
Join date : 2016-06-13

Back to top Go down

Re: Model 96 fuel tank

Post  dalgrae on Thu Aug 03, 2017 10:44 am

Thats a very good description ,the ones I have are very thin

Regards. Colin

dalgrae

Posts : 56
Join date : 2017-04-08
Age : 68
Location : Bristol

Back to top Go down

Re: Model 96 fuel tank

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum