Latest topics
» Cruiser 39 wiring.
Yesterday at 3:59 pm by kerabo

» 1935 Francis Barnett cruiser
Yesterday at 2:03 pm by davin999

» Villiers 32A
Yesterday at 11:19 am by peter@dunfordconstruction

» Tank cleaning
Yesterday at 6:27 am by kerabo

» Help with gasket (gearbox)
Mon Oct 22, 2018 10:36 am by kerabo

» VILLIERS 1H
Mon Oct 22, 2018 9:44 am by FBKev

» 2t Villiers Electronic Ignition etc
Sun Oct 21, 2018 8:34 pm by stuart elkes

» Dating certificate
Sun Oct 21, 2018 3:53 pm by FBOVS429

» Cruiser 39 Dynamo
Sat Oct 20, 2018 3:10 pm by kerabo


Falcon 87 1966 Electrics

Go down

Falcon 87 1966 Electrics

Post  peter@dunfordconstruction on Mon Jul 03, 2017 2:53 pm

Please could anyone tell me or better still send a photo of the position of the Ign Coil & rectifier . I am using a standard Coil & a new small square rectifier with 4 contacts. Also do you have to earth thro' the centre bolt hole of the rectifier to the frame of the bike?

Peter

peter@dunfordconstruction

Posts : 312
Join date : 2014-10-28
Location : Lymington Hampshire

http://peter@dunfordconstruction.co.uk

Back to top Go down

modern 4 contatc rectifier

Post  Bigjim on Mon Jul 03, 2017 5:12 pm

look at you rectifier, the 4 tags should be labelled.
+ve -neg and two with this symbol ~(AC) Is your bike POS or NEG earthed?
If POS then put the POS tag to earth. If NEG earthed then put NEG tag to earth.
All of this assumes you have an alternator, which the Wipac manual says you do.
The old style rectifier has 3 connectors, the fourth being the CENTRAL bolt to earth. My diagram shows light green & white as the AC into the rectifier and BROWN as DC out. It also says it is a POS earth, so the brown wire goes to the NEG on the rectifier and POS tag goes to earth
avatar
Bigjim

Posts : 167
Join date : 2016-06-13

Back to top Go down

falcon 87 Electrics

Post  peter@dunfordconstruction on Mon Jul 03, 2017 7:16 pm

Thanks Bigjim . Have Identified the Rectifier terminals OK . .The bike does have an alternator and it is pos earth

so should be ok,. But still need positioning of both Ign coil & Rectifier on bike if there is another kind sole.

Many thanks Peter

peter@dunfordconstruction

Posts : 312
Join date : 2014-10-28
Location : Lymington Hampshire

http://peter@dunfordconstruction.co.uk

Back to top Go down

Falcon 87 electrics

Post  FB vincent on Tue Jul 04, 2017 6:37 am

Many more posts on this subject on the Forum - use the SEARCH function

This post may help with the position of a replacement rectifier:http://fboc.niceboards.org/t3012-rectifier-position?highlight=rectifier

Sandy

FB vincent

Posts : 663
Join date : 2009-01-20
Location : Hertfordshire

Back to top Go down

falcon 87

Post  peter@dunfordconstruction on Tue Jul 04, 2017 7:33 am

Thanks Sandy

Peter

peter@dunfordconstruction

Posts : 312
Join date : 2014-10-28
Location : Lymington Hampshire

http://peter@dunfordconstruction.co.uk

Back to top Go down

Re: Falcon 87 1966 Electrics

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum