Latest topics
» Speedo drive - Rear wheel
Today at 19:31 by peter@dunfordconstruction

» Battery Help
Today at 14:07 by FBKev

» Yorkshire police Falcon
Yesterday at 13:02 by piston 197

» Cruiser oil
Mon Jan 21 2019, 18:48 by kerabo

» One from every year
Mon Jan 21 2019, 08:12 by piston 197

» American thoughts of a British Bike Cruiser 39.
Sun Jan 20 2019, 17:10 by John Wakefield

» NEW CLUB MEMBERS
Sun Jan 20 2019, 10:40 by piston 197

» Cruiser 39 gear change
Sat Jan 19 2019, 17:16 by kerabo

» Re-register Cruiser/Falcon
Sat Jan 19 2019, 13:08 by peter@dunfordconstruction


Cruiser 80 gearbox problem

Go down

Cruiser 80 gearbox problem

Post  sbeagle on Thu May 18 2017, 20:06

Hi I have 2 problems in stripping down the gearbox on the Cruiser 80.

How do I remove the mainshaft and does it need a special tool?
How do you remove the front sprocket with the gearbox stripped down?

All help would be appreciated thanks

sbeagle

Posts : 16
Join date : 2016-12-28

Back to top Go down

Gearbox

Post  piston 197 on Fri May 19 2017, 07:17

Providing you have removed everything securing the main shaft it will come out easily ?
Have you ended up with the mainshaft still in the main case and held by the gearbox sprocket ? if so you need to remove the gearbox sprocket and securing nut before it will come out. If you have it still attached to the end case then it is just a matter of removing everything securing it and tapping it out of the bearing
To remove the front engine sprocket from the crankshaft it is a matter of preventing the crank from turning and undoing the nut securing it ?
JH
piston 197
piston 197
Moderator

Posts : 4223
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

gearbox problem

Post  sbeagle on Fri May 19 2017, 18:46

Drive sprocket stuck hard. Probably been on for 60 years. Flattened the tab washer applied heat, used a 3ft bar and was having none of it. Ended up cutting the nut off.

Main-shaft has a threaded Colette which I tapped off and this revealed a nut. Then knocked out the bearing and happy days all ready for the rebuild

sbeagle

Posts : 16
Join date : 2016-12-28

Back to top Go down

Re: Cruiser 80 gearbox problem

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum