Latest topics
» Gearbox help
Today at 3:19 pm by Archie Howard

» Brake shoes reline
Yesterday at 7:30 pm by kerabo

» Cruiser 39 oil pipe.
Yesterday at 3:47 pm by davin999

» Magneto tester
Yesterday at 1:04 pm by kerabo

» Falcon 87 spark plug
Fri Feb 15, 2019 2:57 pm by Archie Howard

» Wanted Front Wheel Nuts
Thu Feb 14, 2019 10:45 pm by keith livingstone

» Cruiser 39 gearbox
Thu Feb 14, 2019 5:41 pm by kerabo

» Carb settings cruiser 79
Tue Feb 12, 2019 5:56 pm by kerabo

»  Plover won't start -:no spark
Tue Feb 12, 2019 9:09 am by Ted Jarvis


6" front brake

Go down

6" front brake

Post  kerabo on Wed Jul 20, 2016 12:44 pm

Can anyone tell me the correct sequence for the spacers and washers on the normal 6" FB front hub. I could do it with trial and error but it makes life easier if someone know.
So spacers and the depth of them and where are washers used. Am I right in thinking one wheel nut is longer and floats until the wedge is tight. The other bottoms in the recessed nut?

Thanks Ken
kerabo
kerabo

Posts : 2601
Join date : 2008-02-11
Age : 68
Location : Falcon 87..1936 Cruiser 39. Falcon 81 Green Lane bitsa. Sunbeam S8. Honda Deuville.

Back to top Go down

wheel nut

Post  piston 197 on Wed Jul 20, 2016 1:54 pm

Both wheel nuts are the same length ! ( will post your brake arm in the morning)
JH
piston 197
piston 197
Moderator

Posts : 4248
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

front Brake

Post  kerabo on Wed Jul 20, 2016 2:13 pm

Am I right in thinking the nuts float to let the fork legs equalize and then clamp with the wedges . I know one side goes into the recessed deep nut.
Regards Ken
kerabo
kerabo

Posts : 2601
Join date : 2008-02-11
Age : 68
Location : Falcon 87..1936 Cruiser 39. Falcon 81 Green Lane bitsa. Sunbeam S8. Honda Deuville.

Back to top Go down

about right

Post  piston 197 on Wed Jul 20, 2016 2:38 pm

Best to pull up the brake side first to get maximum engagement with the brake stop, do up the wedge that side, then tighten up the opposite side and do up that wedge
JH
piston 197
piston 197
Moderator

Posts : 4248
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

Re: 6" front brake

Post  kerabo on Wed Jul 20, 2016 4:10 pm

piston 197 wrote:Best to pull up the brake side first to get maximum engagement with the brake stop, do up the wedge that side, then tighten up the opposite side and do up that wedge
JH
Thanks John

Regards Ken
kerabo
kerabo

Posts : 2601
Join date : 2008-02-11
Age : 68
Location : Falcon 87..1936 Cruiser 39. Falcon 81 Green Lane bitsa. Sunbeam S8. Honda Deuville.

Back to top Go down

Re: 6" front brake

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum